Twitter Facebook Instagram
LinkedIn
Youtube
Latest Headlines

 

ASSE International Publishes Two New Listing Evaluation Criteria (LEC) Documents for Drinking Water Treatment Systems

ASSE International Publishes Two New Listing Evaluation Criteria (LEC) Documents for Drinking Water Treatment Systems

ASSE International has published two new Listing Evaluation Criteria (LEC) documents – ASSE LEC 2004-2019, Drinking Water Treatment Systems Using Air as a Source, and ASSE LEC 2006-2019, Point of Entry Reverse Osmosis Systems.

ASSE LEC 2004 systems, also known as atmospheric water generators, are used to produce drinking water by using humidity as a source. Typical applications include areas where water is scarce or where water supplies are of unknown quality. To become a source of drinking water under ASSE LEC 2004, the water from air should be safe to the consumer and produced for a reasonable cost so that it’s affordable. Atmospheric water generation becomes a real source of water supply in places where tap water is not available, or where the quality of tap water does not meet consumer requirements.

“Water conservation continues to be an important role for the plumbing and water treatment industry,” said Tom Palkon, ASSE International Executive Director. “As major droughts and deteriorating access to safe drinking water continue to affect countries around the world, new technologies continue to emerge in order to provide safe drinking water. Creating ASSE LEC 2004 was necessary to help ensure that these products produce potable water of appropriate quality.”

ASSE LEC 2006 Point of Entry (POE) Reverse Osmosis (RO) systems are used to treat and improve water quality as well. RO water treatment equipment reduces total dissolved solids, heavy metals, microbes, inorganics, and organic water contaminants, and are typically installed after the water meter in residences or businesses. These systems use a variety of membrane sizes based on the design of the system. ASSE LEC 2006 covers systems that produce a product flow rate of at least 2.0 gpm (7.6 L/min) out of the system.

“ASSE LEC 2006 complements ASSE 1087, Performance Requirements for Commercial and Food Service Water Treatment Equipment Utilizing Drinking Water, by providing test protocols to evaluate the contaminant reduction performance of the POE system,” said Conrad Jahrling, ASSE International Staff Engineering Supervisor. “ASSE LECs establish the initial rules and performance requirements for unique products in the marketplace and offer the opportunity for new devices to gain traction in the marketplace when combined with third-party certification.”

To purchase ASSE LEC 2004-2019 or ASSE LEC 2006-2019, please visit the ASSE International Webstore at www.assewebstore.com. For questions regarding the LEC, contact Staff Engineering Supervisor Conrad Jahrling at (708) 995-3017 or by email at conrad.jahrling@asse-plumbing.org.




Contact Us

International Association of Plumbing
& Mechanical Officials

4755 E. Philadelphia St.
Ontario, CA 91761 USA
1-909-472-4100
Fax: 909-472-4150
E-mail: iapmo@iapmo.org
Website: www.iapmo.org



Upcoming Events

IAPMO 92nd Annual Education and Business Conference
September 11-15, 2022
Charlotte, NC
www.iapmo.org

ASPE Conference
September 16 - 21

WaterSmart Innovations 2022
October 4 - 6. 2022 https://www.watersmartinnovations.com/

Updating the Hunter's Curve: The Water Demand Calculator Summit
November 1, 2022
www.iapmo.org

 

IAPMO Media Room

IAPMOnline

eOfficial

I-Connection

IAPMO Green Newsletter
Supporters, Partners and Memberships
AWE
Greenmech
Watersmart
Greenbuild
WaterSense
GreenPlumbers
UA
ASSE
MCAA
WPC
PMI
SMWIA
ARCSA
SMACNA
PCA
NITC
PHCC
© 2025 International Association of Plumbing and Mechanical Officials