IAPMO R&T
IAPMO R&T

 

RECOGNIZED LABS

For More Information and Test to Standards on the following labs, download the .pdf copy by clicking here.

 

INTERTEK (GUANGZHOU)
ROOM 4103 & 4203
NO. 63 PUNAN ROAD
HUANGPU DISTRICT
GUANGZHOU, GUANGDONG,
CHINA
Contact: JEFF DENG

Phone: 86-20-8213-9504
Fax: 86-20-3205-7538
   Lab #: 0000081
Expires: 3/30/2019
Number of Employees: 400

Tests to Standards:
APPLIANCES:
ASSE 1008-2006, IGC 226-2006a, ASSE 1023-1979, IAPMO/ANSI Z1088-2013

BACKFLOW PREVENTERS:
ASSE 1024-2004, ASME A112.18.3-2002(R2012), CSA B125.3-2012, CSA B64 Series-11

BALLCOCKS/FLUSHOMETERS:
ASME A112.19.5-2017/ CSA B45.15-17, ASME A112.19.10-2003(R2008), ASSE 1002-2015, ASSE 1037-2015/ ASME A112.1037-205/CSA B125.37-2015, IAPMO IGC 181-2009

BATHROOM ACCESSORIES:
IAPMO IGC 186-2004(R2014)

LOW LEAD:
NSF 372-2011, Section 1417(d) of the Safe Drinking Water Act, and The lead content requirements of Section 116875 of the California Health & Safety Code

METAL PIPE/FITTINGS:
ASME A112.18.2-2015/ CSA B125.2-15, ASME B16.22-2013, ASTM A 888-2015, CSA B70-2012, CSA B602-2010, ASTM-B75-2002(R2010) (Except sections 6, 15.2), ASTM-B88-2009 (Except sections 6, 10.1), ASTM-B280-2013 (Except sections 6, 11.0), ASTM-B306-2013(Except sections 6, 9.2), ASTM-B837-2010 (Except sections 6, 10.1), ASTM C 564-2014, ASTM C 1277-2015, ASTM C 1540-2015, ASME A112.6.3-2001(R2007), SAE J1670-2008, CAN/CGSB 12.1 (M90), ASTM B687-1999 (R05) e1, ASME A112.21.3M-1985 (R2007), ASTM A74-2013a, CISPI 301-12

METAL FIXTURES:
ASME A112.19.3-2017/ CSA B45.4-17, CSA B45.3-2002 (R08), ASME-A112.19.1-2013/ CSA B45.2-13, ASME A112.19.1-2013, ASME A112.6.2-2017, ASME B16.51-2013, IAPMO PS 117-2012ae1

NON-METALLIC PIPE & FITTINGS:
ASME A112.18.6-2017/ CSA B125.6-17, ASTM F409-2012, CSA B125.5-11/ IAPMO Z600-11

NON VITREOUS CHINA FIXTURES:
ASME A112.19.2-2013/ CSA B45.1- 13, ASME A112.19.5-2011/ CSA B45.15-11

PHYSICAL/STRUCTURAL:
ANSI Z97.1-2009, 16 CFR PART 1201

PLASTIC CELL CLASS TESTING:
ASTM D1784-2011, ASTM D4101-2014, ASTM D3965-2005, ASTM D3350-2008

PLASTIC FIXTURES:
ANSI Z124.5-2013e1, ANSI Z124.7- 2013, ANSI Z124.8-2013e2, ASME A112.19.7-2012/ CSA B45.10-12, CSA B45.5-17/ IAPMO Z124-2017, CSA B45.11-11/ IAPMO Z401-2011, IAPMO IGC 154-2015, CSA B45.8/IAPMO Z403-2013, ASME A112.19.15-2012

PLASTIC PIPE/FITTINGS:
CSA B79-2008, IAPMO IGC 224-2009, ASTM F877-2011a, ASTM-F876-2013a, ASTM D2241-2009, ASTM D1785-2012, ASTM D2661-2014, ASTM D2665-2014, D3035-2014a, ASTM F1281-2011, ASTM F1282-2010, ASTM F1807-2015, ASTM F1974-2009,ASTM F2159-2014, ASTM F2389-2010,ASSE 1061-2011, CSA B137 Series-13, ASTM D2466-2015, IAPMO IGC 109-2015, IAPMO IGC 319-2016, ASTM F1960-2015, ASTM D2846-14

POOL/SPA COMPONENTS/FITTINGS:
ASME A112.19.7-2012/ CSA B45.10-12 (except section 5.3), IAPMO/ANSI Z1033-2013

SEPTIC SYSTEMS:
IGC 167-2011ae1

TOXICITY TESTING:
NSF 61-2017 section 4,8 and 9 (except Nitrosamines)

VACUUM BREAKERS:
ASSE 1001-2008, ASSE 1011-2004e1

VALVES/FAUCETS:
ASME A112.18.1-2012/ CSA B125.1-12 (Less Section 2.1 Toxicity Evaluation but include Water Extraction), ASSE 1014-2005, ASSE 1016-2011/ ASME A112.1016-2011/ CSA B125.16-11, ASSE 1019-2011, IAPMO Z1157-2014e1, IAPMO PS 50-2010 , CSA-B125.3-2012, ICC A117.1-2017, EPA WaterSense High-Efficiency Lavatory Faucet Specification, Version 1.2 Dated 2007-10-01, IAPMO IGC 267-2015e1, MSS-SP-80-2013, EPA WaterSense Specification for Showerheads, Version 1.2 Dated 2010-03-04, NSF 14-2015, ASSE 1069-2005, ASSE 1070-2015/ CSA B125.70-15, IAPMO PS 72-2007e1, ASSE 1017-2009, MSS SP-145-2013, IAPMO IGC 258-2008, IGC 312-2014, CSA B651-12 (Sections 6 & 7)

VITREOUS CHINA FIXTURES:
ASME A112.19.2-2013/ CSA B45.1-13, ASME A112.19.19-2006 (R2011)

WATER CLOSET:
ASME A112.19.14-2013,ASME A112.4.2-2009, ASME A112.6.2-2000(R2010), EPA WaterSense Specification for Tank-Type Toilets, Version 1.2 Dated 2014-06-02, LADWP SPS-2005, EPA WaterSense High Efficiency Flushing Urinal Specification, Version 1.2 Dated 2009-08-14

Return to List