IAPMO R&T
IAPMO R&T

 

RECOGNIZED LABS

For More Information and Test to Standards on the following labs, download the .pdf copy by clicking here.

 

CRT LABORATORIES (CALIFORNIA RESIN TESTING)
1680 N MAIN STREET
ORANGE, CA 92867
United States
Contact: KEN LE JUENE

Phone: 714 283-2032
Fax: 714 283-1365
   Lab #: 0000037
Expires: 3/31/2019
Number of Employees: 4

Tests to Standards:
BACKFLOW PREVENTERS
ASME A112.14.1-2003 (R08)

CEMENTS/SOLDER/JOINT COMPOUNDS:
ASTM B 32-2008(sections 8.1, 8.1.1, 8.1.2, 8.2, 8.2.1, 8.2.2, 13.1, 13.1.1, 13.1.2, 13.1.3, 13.3.1, 13.3.2, 13.3.3, 13.3.4, 13.3.5), B813-2016, D2235-2004(R2011), D2564-2012, D2672-1996a (R2009), D2855-96 (R2010), D3122-1995 (R2009), D3212-2007, F656-2010

ELECTRICAL:
UL 651-1995

MANUFACTURED HOUSING/RV COMPONENTS:
IAPMO PS 42-2013, PS 54-2015 (Except Section 7.4), PS 94-2012, PS 95-2001, PS 64 -2012ae1(except 4.1.1 and 6.4),CSA B272-93 (R008)

METAL FIXTURES:
ASME A112.6.4-2003 (R08), ASME A112.18.6-2009, ASME A 112.6.3-2016, ASME A112.6.7-2010 (Except Section 5.2 Specular Gloss), CSA B45.12-13/ IAPMO Z402-2013

METAL PIPE/FITTINGS:
ASME A112.18.6-2009, ASTM C 1173-2010e1 (except section 9.1.4), ASTM F 1807-2012 (except 5), ASTM F 2306-2011 (except section 7.8), ASME A112.18.2-2011/ CSA B125.2-11 (except sections: 5.2 & 5.4), IAPMO PS 120-2004 with exception to chem analysis in section 4.1 (capable metal analysis portion), ASTM C 1053-2000 (R2010), ASTM C 1460-2012, ASTM F 1948-2011.

PIPE WRAP TAPE/COATINGS:
IAPMO PS 37-1990 (except dielectric breakdown, High Humidity Insulation Resistance), AWWA C210-2007, AWWA C213-2007, IGC 189-2008 (Except section 4.1), ASTM F1743-08

PLASTIC CELL CLASS TESTING:
Fingerprinting material using infrared and differential scanner
ASTM D 1248-1984, ASTM D 1784-2011, ASTM D3350-2014, ASTM D3965-2011, ASTM D4101-2014 (except section 13.1.7), ASTM C 564-14 (except 9.7)

PLASTIC FIXTURES:
ANSI Z124.5-2013, IAPMO PS 94-2012, PS 90-2012e1 (except 4.1.2), CSA B45.5-17/ANSI Z124-2017(except 5.10 and 5.12), ANSI Z124.8-2013 (except 5.4, 5.6, 5.7), ASME A112.6.4-2003(R08) , ASME A112.6.3-2001(R2007) , ASME A112.18.6-2017 (Except Toxicity), ASTM D5630-2013

PLASTIC PIPE/FITTINGS:
ASME A112.18.6-2009, ASTM D1527-1999(R2005), D 1785-2012, D2104-2003, D2239-2012, D2241-09, D2466-2006, D2467-2012, D2468-1996a, D2513-2012ae1, D2661-14(CSA, CAN/CSA-B181.1-M90), D2665-2014(CSA, CAN/CSA-B181.2-11), D2680-2001 (R09), D2729-11, D2737-2003, D2751-2005, D 2846-2009be1, D3034-2008(CSA, CAN/CSA-B182.2-M90), D3212-07, D3311-11, F405-2005, F409-2012, F437-09, F438-09, F439-09, F441-09, F442-2012, F628-2012e1 (Section 6.4.4 only), F667-2012, F794-2003 (R09), F810-2012, F876-2010e1, F 877-2011a, F 891-2010, F 949-2010, F 1412-2016, F 1673-2010, F 2158-2008;ASME A112.18.2-2011/ CSA B125.2-11(except sections: 5.2 & 5.4), A112.14.1-2003(R08) ,A112.6.4-2003 (R08),A112.6.3-2001(R2007), IAPMO Z1033-2013, PS 51-2013, PS 90-2012e1 (except 4.1.2), PS 94-2012, AWWA C900-1997 (pipe sizes through 8"),IAPMO IGC 120-1998a, IAPMO IGC 224-2009, ASTM F 1924-2012, NSF 14-2016a

POOL/SPA COMPONENTS/FITTINGS:
IAPMO Z1033-2013

SEPTIC SYSTEMS:
IAPMO Z1000-2013, IAPMO IGC 219-2005, IAPMO IGC 262-13 (Except Section 4.4), IAPMO PS 63-2005, IGC 276-2011 (Except section 6.1), IAPMO PS 52-2009e1

SHOWER PAN LINERS:
ANSI A118.10-R2017 (except M-4.1), ASTM D 4068-2009 (except 14.4), IAPMO PS 106-2015e1, ANSI A118.12-17

VALVES/FAUCETS:
ASSE 1016-2011/ ASME A112.1016-2011/CSA B125.16-11 (Except sections 4.6, 4.7, 4.8 and 4.9), ASSE 1014-2005, ASME A112.18.1-2012/ CSA B125.1-12(except sections: 5.2, 4.9 Toxicity, 4.13), (CSA, CAN/CSA-B70-M91)

WATER CLOSETS:
ASME A112.3.4-2013/ CSA B45.13


Return to List