|
RECOGNIZED LABS
For More Information and Test to Standards on the following
labs, download the .pdf copy by clicking here.
U.S. ANALYTICAL LABORATORY
600 S. STATE COLLEGE BLVD.
FULLERTON, CA 92831
United States
Contact: ALFRED BECK
Phone: 714-773-9151
Fax: 714-773-0521
|
|
Lab #: 0000032
Expires: 12/31/2013
Number of Employees: 4
|
|
Tests to Standards:
|
APPLIANCES:
AHAM DW-1-2010
BACKFLOW PREVENTERS:
ASME A112.18.3-2002 (R08) (except section 15), ASSE 1014-2005, ASSE 1011-2004 (CSA, CAN/CSA-B64.2.1-94, B64.2.2-94, B64.1.2-94), ASSE 1020-2004 (CSA, B45.2-94), ASSE 1021-2001, ASSE 1035-2008 (CSA,CAN/CSA-B64.7-94), ASSE 1079-2005, IAPMO PS 23-2006a, ASME A112.14.1-2003 (R08), ASME A112.4.2-2009, ASSE 1053-2004
BALLCOCKS/FLUSHOMETERS:
ASME A112.19.10-2003 (R08), ASSE 1037-1990, ASSE 1002-2008 (CSA, B45.2-94), ANSI A112.19.5-2005
CEMENT\SOLDER/JOINT COMPOUNDS:
ASTM B32-2008, B 813-2010, ASTM D 2235-2004, ASTM D 2564-2004e1, ASTM D 2672-1996a (R2009), ASTM D 2855-96 (R2002), ASTM D 3122-1995 (R2002), ASTM F656-2010, IAPMO PS 36-1990
CLAY PIPES:
ASTM C425-2004 (CSA, A60.3-M1976)
LOW LEAD:
AB 1953, ANSI NSF 372-2011
METAL FIXTURES:
ASME A112.19.1-2008 (CSA, B45.2-94), ASME A112.19.3-2008 (CSA B45.4-94), ASME A112.6.1M-1997 (R08), ASME A112.6.2-2000 (R2004), ASME A112.6.3-2001, ASME A112.6.4-2003 (R08), ASME A112.6.7-2001
METAL PIPE FITTINGS:
ASME A112.18.2-2011/CSA B125.2, ASTM A74-2009, ASTM A888-2011, ASTM B88-2009, ASTM B135-2002, ASTM B280-2008, ASTM B306-2009, ASTM B584-2006a, ASTM C1173-2010, ASTM C1277-2011 (CSA B602), ASTM C1540-2009a, IAPMO IGC 100-1998, IGC 198-2004, ASME A112.6.4-2003 (R08), PS 95-2001, CISPI 301-2009, CISPI 310-2011, ASTM F1807-2011ae1, ASME B16.15-2006, ASME B16.22-2001, ASME B16.29-2001, ASSE 1061-2011, ASTM B687-05 e1, ASTM B 360, ASTM B 743
MFG'D HOUSING/RV COMPONENTS:
IAPMO TS 28-2006
NONMETALLIC PIPE\FITTINGS:
ASME A112.18.6-2009, ASTM C428-2005, ASME A112.6.4-2003 (R08), IAPMO PS 90-2006
PLASTIC CELL CLASS TESTING:
ASTM D 1248-1984, ASTM D 1784-2008, ASTM D 3350-2008, ASTM D 3935-2009, ASTM D 3965-2005, ASTM D 4101-2010, ASTM D 4066-01a(2008), ASTM C 564-2009a (CSA, CAN/CSA-B70-M91)
PLASTICS FIXTURES:
ANSI Z 124.1.2-2005 (except section 5.1), ANSI Z 124.3-2005 (except section 5.1), ANSI Z 124.4-2006 (except section 5.1), ANSI Z 124.5-2006 , ANSI Z 124.6-2007 (except section 5.1), IAPMO IGC 172-2010, IAPMO PS 55-1992, ASME A112.4.2-2009 CABO/ANSI A117.1-2003, CSA B45.11-2004
PLASTIC PIPE/FITTINGS:
ASTM D 1527-1999, ASTM D 1785-2006(CSA, B137.3-93), ASTM D 2104-2003(CSA, B137.3-93), ASTM D 2146-1982 (CSA, CAN/CSA-B137.11-93), ASTM D 2235-2004, ASTM D 2239-2003(CSA, B137.3-93), ASTM D 2241-2009, ASTM D 2282-1999, ASTM D 2321-2005, ASTM D 2447-2003(CSA, CAN/CSA-B137.1-M89), ASTM D 2464-2006, ASTM D 2466-2006, ASTM D 2467-2006, ASTM D 2564-2004e1, ASTM D 2661-2008(CSA, CAN/CSA-B181.1-M90), ASTM D 2665-2010(CSA, CAN/CSA-B181.2-M90), ASTM D 2672-1996a (R2009), ASTM D 2680-2001 (R09), ASTM D 2729-2003, ASTM D 2737-2003, ASTM D 2751-2005, ASTM D 2846-2009b(B137.6-M1983), ASTM D 2855-96 (R2002), ASTM D 3033-1985, ASTM D 3034-2008, ASTM D 3212-1996a, ASTM D 3311-2009a, ASTM D 3965-2005, ASTM D 4068-2009, ASTM D 4551-1996 (R08) e1, ASTM F 409-2002 (R08), ASTM F 437-2006, ASTM F 438-2009, ASTM F 439-2009, ASTM F 441-1999, ASTM F 442-1999, ASTM F 628-2008, ASTM F 789-1995a, ASTM F 794-2003 (R09), ASTM F 876-2010, ASTM F 877-2001a(CSA, CAN/CSA-B137.5-M89), ASTM F 891-2010, ASTM F 949-2003, ASTM F 1281-2007, ASTM F 1282-2010, ASTM F 1412-2009, ASTM F 1673-2004, ASTM F 1960-2004, ASTM F 1974-2009, ASME A112.19.12-2006, IGC 228-2006, IAPMO PS 69-2006, PS 66-2000
PLASTIC WRAP TAPES/COATINGS:
IAPMO PS 37-1990
POOL/SPA COMPONENTS/FTGS:
IAPMO SPS 5-2006, IAPMO PS 33-2011
SHOWER PAN LINERS:
ASTM D 4068-2009, ASTM D 4551-1996 (R08)e1
TOXICITY:
NSF 14-2010, NSF 61-2010a
VACUUM BREAKERS:
ASSE 1001-2008, ASSE 1011-2004, ASSE 1014-2005, ASSE 1020-2004 (CSA,CAN/CSA-B64.1.2-94)
VALVES/FAUCETS:
PS 72-2007, ASME A112.4.2-2009, ASME A112.18.1-2001/CSA B125.1-08, MSS SP-80-2008, ASME A112.18.6-2009, ASSE 1014-2005, ASSE 1016-2005, ASSE 1017-2009, ASSE 1019-2004, ASSE 1066-1997, IAPMO IGC 157-2010, EPA WaterSense High Efficiency Lavatory Faucet Specification Version 1.0 Dated 10/1/07, EPA WaterSense Specification for Showerheads Version 1.0 Dated 8/14/09, IGC 267-2011, ASME A112.21.3M- 1985(2007)
VITREOUS CHINA FIXTURES:
ASME A112.19.2-2008
WATER CLOSETS:
ASME A112.19.2-2008, ASME A112.19.14-2006, IAPMO PS 50-2010, ASME A112.19.3-2008, IAPMO PS 67-2010, ASME A112.4.2-2009, LADWP SPS req. for Ultra-Low-Finish Toilets Supplementary Specification to ASME A112.19.2M & ASME A112.19.2-2005, UNAR 2006, ASME A112.6.2-2000 (R2004), EPA WaterSense Specification for Tank-Type Toilets Version 1.1 Dated 5/20/11
POLYMER ID:
FTIR Scanning for Polymer ID, Microscopic & U.V. Visible Spectrophotometric for Additives ID
|
|
© 2013 - IAPMO Research and Testing, All Rights Reserved
|
