IAPMO R&T
IAPMO R&T

 

RECOGNIZED LABS

For More Information and Test to Standards on the following labs, download the .pdf copy by clicking here.

 

BUILDING TECHNOLOGY RESEARCH LAB CENTER FOR ENVIRONMENTAL SYSTEMS/ STEVENS
1 CASTLE POINT TERRACE
HOBOKEN, NJ 07030
United States
Contact: TSAN-LIANG SU

Phone: 201 216-5697
Fax: 201 216-8303
   Lab #: 0000030
Expires: 3/31/2019
Number of Employees: 12

Tests to Standards:
APPLIANCES:
IAPMO Z1088-2013, ASME A112.4.1-2009, CSA B45.13-14/ IAPMO Z1700-2014 (Witness Test Only)

BACKFLOW PREVENTERS:
ASME A112.18.3-2002(R2012), ASSE 1013-2011(CSA,CAN/CSA-B64.4-2011), ASSE 1012-2009, 1015-2011, 1022-2003, 1024-2004, 1032-2004(R2011), 1047-2011, 1048-2011, 1052-2004(CSA, CAN/CSA-B64 SERIES-2011, B64 SERIES-2011, B64 SERIES-2011), ASSE 1055-2009, ASSE 1079-2012, IAPMO IGC 163-2001r1, CSA B64 Series-2011

BALLCOCKS\FLUSHOMETERS:
ASSE 1002-2008, ASSE 1037-2015/ ASME A112.1037-2015/ CSA B125.37-2015, ASME A112.19.5-2017/ CSA B45.15-17, CSA B64.3-2011, ASME A112.19.10-2003(R2008), IAPMO PS 50-2010

LOW LEAD:
AB 1953, NSF 372-2011

METAL FIXTURES:
ASME A112.19.3-2008 (CSA, B45.4-2008), ASSE 1014-2005, IAPMO PS 67-2010, ANSI Z358.1-2009

METAL PIPE/FITTINGS:
ASME A112.1.2-2012, ASME A112.3.1-2007, ASME A112.6.3-2001(R2007),ASME A112.18.2-2015/CSA B125.2-2015), ASME A112.18.6-2017, ASME A112.36.2-1991(R2012), ASME B 16.23-2011(CSA, B158.1-1976), ASME B 16.29-2001, ASSE 1018-2001, ASTM C 564-2012, IAPMO PS 72-2007e1, IAPMO IGC 128-2012, ASTM C1277-2012, IAPMO PS 76-2012a, IAPMO PS 79-2005

MFG'D HOUSING/RV COMPONENTS:
TS 8-2009

NON-METALIC PIPE/FITTINGS:
IAPMO PS 69-2006, IAPMO/ ANSI Z1033-2013 (except 4.2.1)

PLASTIC FIXTURES:
CSA B45.5-17/ IAPMO Z124-2017, IAPMO/ANSI Z124.5-2013, IAPMO/ANSI Z124.7-2013, IAPMO IGC 172-2008

PLASTIC PIPE/FITTINGS:
ASTM D2665-2012 (except Sections 5, 6.3 and 6.5), ASTM D3311-2011, ASTM F409-2012 (except Section 5),IAPMO SPS 5-2006, ASSE 1063-2008

VACUUM BREAKERS:
ASME A112.18.3-2002(R2012), ASSE 1001-2008(CSA, CAN/CSA-B64 SERIES-2011;B64 SERIES-2011), ASSE 1003-2009(CSA, B356-2010), ASSE 1011-2004e1(CSA, CAN/CSA-B64 SERIES-2011, B64 SERIES-2011, B64 SERIES-2011), ASSE 1019-2011, ASSE 1020-2004 (CSA, B45.2-2008), ASSE 1056-2001, ASSE 1035-2008e1 (CSA,CAN/CSA-B64.7-2011), IAPMO Z1033-2013, CSA B64 Series-2011, ASSE 1053-2004, ASME A112.1.3-2000(R2010)

VALVES/FAUCETS:
ASME A112.18.1-2012/CSA B125.1-2012, CSA B125.3-2012 (Except Section 5.2 Coating), ASME A112.18.6-2017, ASSE 1016-2011/ ASME A112.1016-2011/CSA B125.16-11, ASSE 1017-2009, ASME A112.18.1-2012 (CSA,CAN/CSA-B64 SERIES-2011), ASSE 1062-2006, ASSE 1066-1997, ASSE 1069-2005, ASSE 1070-2004, ASSE 1071-2012, IAPMO IGC 128-2008, IAPMO IGC 157-2013, IAPMO IGC 168-2012, AB 1953, IGC 241-2011a, ASSE 1044-2001, ASSE 1057-2012, EPA WaterSense High-Efficiency Lavatory Faucet Specification, Version 1.2 Dated 2007-10-01

VITREOUS CHINA FIXTURES:
ASME A112.19.2-2013/CSA B45.1-13

WATER CLOSET:
ASME A112.19.2-2013/CSA B45.1-13, ASME A112.19.14-2013, LADWP SPS, EPA WaterSense Specification for Tank-Type Toilets, Version 1.1 Dated 2011-05-20

Return to List