IAPMO Green Newsletter
Latest Headlines

 

Efficiency Standards Save Consumers, Businesses More Than $1.1 Trillion

New Study Finds Typical Household Will Save $10,000 from 2010-25; Enormous National Energy and Water Savings Gained

Washington, D.C.—National efficiency standards for appliances, lighting, and other equipment will save consumers and businesses more than $1.1 trillion and dramatically reduce greenhouse gas pollution and other emissions by 2035, according to The Efficiency Boom: Cashing In on the Savings from Appliance Standards, a study released this month.  

Even greater savings could be achieved. Updates to existing standards and new standards for other products that can be completed between now and 2015 could net consumers and businesses another $170 billion and reduce pollution even further.

The study by the American Council for an Energy-Efficient Economy (ACEEE) and the Appliance Standards Awareness Project (ASAP) finds that existing standards will save 200 quads of energy by 2035, with another 42 quads of savings achievable with new standards. A "quad" is a measure of energy—the U.S. economy uses a total of about 100 quads per year.

 "Improving the energy efficiency of everyday products with common-sense standards has proven to be one of the best ways to save consumers and businesses money while protecting the environment and avoiding the need to build expensive new power plants," said Andrew deLaski, executive director of ASAP, a coalition of consumer, environmental, and efficiency groups. "Standards have been a bipartisan energy policy success story stretching across four decades and five presidencies."

Existing energy efficiency standards cover about 55 categories of products, ranging from major home appliances like refrigerators to commercial products such as motors and roof-top air conditioners. Initial standards for many of these products were signed into law by President Ronald Reagan in 1987. Since then, Congress and the Department of Energy have repeatedly added new products and updated standards. The study published today examines what more can be done.

"Our research found that a combination of updates for existing standards and first-time standards for products like computers, TV set-top boxes, and street lights would add to the track record of big energy, economic, and environmental benefits achieved by standards," said Amanda Lowenberger, lead report author and senior research analyst at ACEEE.

According to the report, existing standards reduced U.S. electricity use by 7 percent in 2010. Annual electricity savings from existing standards will increase to 14 percent by 2035 as consumers and businesses purchase new products compliant with the latest standards. New and updated standards that can be completed by 2015 would reduce 2035 electricity use by another 7 percent.

Direct natural gas savings from existing standards will reach 950 trillion BTUs by 2035, or enough to heat about one out of every three natural gas-heated homes. New and updated standards for gas products would add another 240 trillion BTUs in annual gas savings by 2035. New standards would also deliver enormous water savings: more than 430 billion gallons annually by 2035—enough to supply New York City.

"There's no question standards have made a significant contribution to lowering home utility bills," said Mel Hall-Crawford, energy projects director for the Consumer Federation of America. "And, there are more savings to be gained through future standards."

According to the study, a typical household will save about $10,000 between 2010 and 2025 simply by purchasing products compliant with minimum standards.  A typical household's total electric bill over this period would be about 33% higher absent efficiency standards. Although efficient products typically cost more up front, the report found that the cost of more efficient products pays back in lower utility bills within about 3 years, with net benefits outweighing costs by 4 to 1.

"Energy efficiency standards are beneficial on so many levels," said David Goldstein, co-director of the Natural Resources Defense Council's energy program. "They help our environment, they help drive innovation and—as this report shows—they help consumers save money with every appliance they plug into their wall sockets."

According to the report, already existing standards reduced U.S. greenhouse gas emissions by about 200 million metric tons in 2010 and the annual reduction level will grow to 470 million metric tons by 2035, or roughly the output of 120 coal-fired power plants. New and updated standards would reduce 2035 greenhouse gas emissions by another 200 million metric tons, or another 50 coal-fired power plants equivalents.

To assess the potential impact of future standards, the report evaluates 34 products for which new or updated standards could be adopted within the next four years. Products with the biggest potential additional energy savings include electric water heaters, reflector light bulbs, distribution transformers, electric motors, and computers. The largest net economic savings would come from new clothes washer and outdoor lighting standards.

To read the report, click here.

For a related fact sheet, click here.



Contact Us
4755 E. Philadelphia St.
Ontario, CA 91761 USA
1-909-472-4100
Fax: 909-472-4150
E-mail: news@iapmo.org
Website: www.iapmo.org

See us on:
facebook youtube Flickr

Upcoming Events

Green Plumbing and Mechanical Code Supplement Technical Committee Meeting
August 22 - 23, 2013

Radiant Professionals Alliance Annual Membership Meeting & Conference
September 17-20, 2013

84th Annual Education and Business Conference
September 29 - October 3, 2013

WaterSmart Innovations Conference and Exposition 2013
October 2-4, 2013

USEHC & USPSHTC Technical Meetings
October 28-29, 2013

Greenbuild 2013
November 20-22, 2013

International Emerging Technology Symposium
April 23-24, 2014



Conference

GPT


IAPMO Green Newsletter
Supporters, Partners and Memberships
AWE
Greenmech
Watersmart
Greenbuild
WaterSense
GreenPlumbers
UA
ASSE MCAA WPC PMI SMWIA PHCC ARCSA
SMACNA
PCA
ASPE
ASHRAE
IAPMO Media Room
IAPMOnline

eOfficial

DW&BP

I-Connection
© 2013 International Association of Plumbing and Mechanical Officials